How Should Shingle Life be Applied? Surface Preparation: Surfaces and substrates must be free of all dirt, mildew, mold and other contaminants. Before you Begin: Do a trial test before application. Surface may darken slightly with application and color appearance is different when fully dry. Do not apply if rain is expected within 48 hours. Temperature must be above 50 F and remain above freezing for 24 hours. Cover plants and shrubs. If using a sprayer, move all objects that could come in contact with over spray. Wet over spray can be removed by flushing immediately with water. Protect product from freezing. Do not store below 32 F. Application: Do not use with other products Do not thin A small trial patch should be tried before application over the entire surface. Apply using a brush, roller, or sprayer. Apply only one thin even coat. Do not apply two coats. Avoid puddling. Tackiness will result if over applied with multiple coats.	New Technology Shingle Life maximum strength one coat treatment is a breakthrough formulation providing the ultimate in advanced asphalt shingle resaturation. Based on patented technology, this penetrating maximum strength one coat resaturant protects your asphalt shingle, and maintains your roofs appearance and offers unique benefits. Protection and Beauty: Advanced formulation protects your investment Long Lasting Beautiful finish Convenience: Time saving one coat formula Easy soap and water clean up Immediate resaturation of asphalt shingles Clean and treat in one day can be applied to damp shingles Low odor Customer Satisfaction: This product can be expected to protect asphalt shingles from aging for 3 years when used in North America. Restoration of previously aged and defective asphalt shingles is not guaranteed. Satisfying customer complaints will not include freight and handling costs, labor or the cost of labor for the application, of this product and specifically excludes any direct, incidental, or consequential damages. Drying Time: Drying time will vary depending on surface and temperature humidity conditions. Allow a minimum of 8 hours to dry. Clean Up: Clean equipment with soap and water. Approximate Coverage: 100 Sq. Ft. / Gallon
		Contact Information Clipper Roof Coatings 7682 Briar Lane Pasadena, MD 21122 410-360-3313 sales@ShingleLife.com
	©2004 Carr & Thomas LLC